ЧаВо сайта kiitos.tv
О сайте - Наверх
Что такое торрент (bittorrent)? Как скачивать файлы?
Check out Brian's BitTorrent FAQ and Guide
На что расходуются деньги от пожертвований?
Мы хотим приобрести выделенный сервер для комфортных и очень быстрых раздач. На данный момент деньги идут на оплату хостинга.
Где я могу скачать исходники этого движка?
Вы можете взять их на Проект TBDev. Имейте ввиду: мы не осуществляем тех поддержку любого рода, поэтому не присылайте нам пожалуйста баги. Если оно работает - великолепно, если нет - очень плохо. Используйте их только на свой страх и риск.
BitRocket (lastest version)
Информация для пользователя - Наверх
Я зарегистрировал аккаунт, но не получил письмо на е-майл
Вы можете использовать эту форму, чтобы удалить учетную запись, и повторно зарегистрироваться. Заметим, однако, что если вы не получили письмо в первый раз, то, вероятно, не удастся и во второй раз, поэтому вы должны попробовать другой адрес электронной почты
Я забыл имя своего аккаунта или пароль! Можете ли вы выслать мне?
Пожалуйста,используйте эту форму, для восстановления данных
Можете ли вы переименовать мою учетную запись?
Мы не переименовываем аккаунты. Пожалуйста, создайте новый. (Используйте эту форму , чтобы удалить данный аккаунт.)
Вы можете удалить мой (подтвержденный) аккаунт?
Вы можете сделать это самостоятельно, используя эту форму
Как посмотреть свой рейтинг?
Нажмите на profile, то есть на ваше имя пользователя (в верхней части).
Важно различать общий рейтинг и индивидуальный рейтинг на каждой раздаче . Вы можете иметь рейтинг "Inf." Это обозначает, что Вы скачали 0 байт, а залили определенное количество байт.
Почему на моей странице виден мой IP?
Только Вы и Администрация видят Ваш IP. Другим пользователям он не виден
Помогите, я не могу войти в аккаунт
Такая проблема часто встречается в браузере Интернет Эксплорер (IE). Закройте все открытые окна браузера и откройте Свойства Браузера в Панели Управления Удалите все cookies и попробуйте войти в аккаунт. Проблема должна решиться
У меня динамический IP. Что мне надо делать, чтоб оставаться подключенным?
Ничего. Вы должны убедится что Вы вошли в Ваш аккаунт с текущим IP, и запустить торрент-клиент. После этого даже если изменится Ваш IP, сидирование или скачивание все равно продолжатся.
Мой порт определятся как "---". Что это значит?
Трекер определил что Вы находитесь за фаерволлом или NAT и не можете принимать входящие соединения. Это значит что другие пиры не смогут соединиться с Вами, что скажется на Вашей отдаче. Решением проблемы является открытие портов для входящих соединений в Вашем фаерволе и/или правильная конфигурация Вашего NAT сервера. Информацию Вы можете найти на форуме поддержки Вашей модели роутера или в интернете
Что обозначают различные классы пользователей?
Почему мои друзья не могут зарегистрироваться?
У нас лимит на 1000 пользователей. Неактивные более 90 дней аккаунты постоянно удаляются, так что Ваши друзья должны продолжать пробовать зарегистрироваться
Как мне установить аватарку?
Найдите подходящую Вам аватарку размером не более 100х100. Залейте ее на любой разрешенный хостинг. Желательно на http://www.imageshack.us/ Скопируйте URL адрес и вставьте его в поле для аватарки в Вашем профиле. Сохраните изменения.
Статистика - Наверх
Заливка - Наверх
Закачка - Наверх
How do I use the files I've downloaded?
Check out this guide.
Downloaded a movie and don't know what CAM/TS/TC/SCR means?
Check out this guide.
Why did an active torrent suddenly disappear?
There may be three reasons for this:
(1) The torrent may have been out-of-sync with the site rules.
(2) The uploader may have deleted it because it was a bad release. A replacement will probably be uploaded to take its place.
(3) Torrents are automatically deleted after 28 days.
How do I resume a broken download or reseed something?
Open the .torrent file. When your client asks you for a location, choose the location of the existing file(s) and it will resume/reseed the torrent.
Why do my downloads sometimes stall at 99%?
The more pieces you have, the harder it becomes to find peers who have pieces you are missing. That is why downloads sometimes slow down or even stall when there are just a few percent remaining. Just be patient and you will, sooner or later, get the remaining pieces.
What are these "a piece has failed an hash check" messages?
Bittorrent clients check the data they receive for integrity. When a piece fails this check it is automatically re-downloaded. Occasional hash fails are a common occurrence, and you shouldn't worry.
Some clients have an (advanced) option/preference to 'kick/ban clients that send you bad data' or similar. It should be turned on, since it makes sure that if a peer repeatedly sends you pieces that fail the hash check it will be ignored in the future.
The torrent is supposed to be 100MB. How come I downloaded 120MB?
See the hash fails topic. If your client receives bad data it will have to redownload it, therefore the total downloaded may be larger than the torrent size. Make sure the "kick/ban" option is turned on to minimize the extra downloads.
Why do I get a "Not authorized (xx h) - READ THE FAQ" error?
From the time that each new torrent is uploaded to the tracker, there is a period of time that some users must wait before they can download it.
This delay in downloading will only affect users with a low ratio, and users with low upload amounts.
This applies to new users as well, so opening a new account will not help. Note also that this works at tracker level, you will be able to grab the .torrent file itself at any time.
N.B. Due to some users exploiting the 'no-delay-for-seeders' policy we had to change it. The delay now applies to both seeding and leeching. So if you are subject to a delay and get the files from some other source you will not be able to seed them until the delay has elapsed.
Why do I get a "rejected by tracker - Port xxxx is blacklisted" error?
Your client is reporting to the tracker that it uses one of the default bittorrent ports (6881-6889) or any other common p2p port for incoming connections.
TBDev Yuna Scatari Edition does not allow clients to use ports commonly associated with p2p protocols. The reason for this is that it is a common practice for ISPs to throttle those ports (that is, limit the bandwidth, hence the speed).
The blocked ports list include, but is not neccessarily limited to, the following:
In order to use use our tracker you must configure your client to use any port range that does not contain those ports (a range within the region 49152 through 65535 is preferable, cf. IANA). Notice that some clients, like Azureus 18.104.22.168 or higher, use a single port for all torrents, while most others use one port per open torrent. The size of the range you choose should take this into account (typically less than 10 ports wide. There is no benefit whatsoever in choosing a wide range, and there are possible security implications).
These ports are used for connections between peers, not client to tracker. Therefore this change will not interfere with your ability to use other trackers (in fact it should increase your speed with torrents from any tracker, not just ours). Your client will also still be able to connect to peers that are using the standard ports. If your client does not allow custom ports to be used, you will have to switch to one that does.
Do not ask us, or in the forums, which ports you should choose. The more random the choice is the harder it will be for ISPs to catch on to us and start limiting speeds on the ports we use. If we simply define another range ISPs will start throttling that range also.
Finally, remember to forward the chosen ports in your router and/or open them in your firewall, should you have them.
What's this "IOError - [Errno13] Permission denied" error?
If you just want to fix it reboot your computer, it should solve the problem. Otherwise read on.
IOError means Input-Output Error, and that is a file system error, not a tracker one. It shows up when your client is for some reason unable to open the partially downloaded torrent files. The most common cause is two instances of the client to be running simultaneously: the last time the client was closed it somehow didn't really close but kept running in the background, and is therefore still locking the files, making it impossible for the new instance to open them.
A more uncommon occurrence is a corrupted FAT. A crash may result in corruption that makes the partially downloaded files unreadable, and the error ensues. Running scandisk should solve the problem. (Note that this may happen only if you're running Windows 9x - which only support FAT - or NT/2000/XP with FAT formatted hard drives. NTFS is much more robust and should never permit this problem.)
What's this "TTL" in the browse page?
The torrent's Time To Live, in hours. It means the torrent will be deleted from the tracker after that many hours have elapsed (yes, even if it is still active). Note that this a maximum value, the torrent may be deleted at any time if it's inactive.
What is the passkey System? How does it work?
The passkey system has been implemented in order to substitute the ip checking system. This means that the tracker doesnt check anymore your logged ip in order to verify if you are logged in or registered with the tracker. Every user has a personal passkey, a random key generated by the system. When a user tries to download a torrent, its personal passkey is imprinted in the tracker url of the torrent, allowing to the tracker to identify any source connected on it. In this way, you can seed a torrent for example, at home and at your office simultaneously without any problem with the 2 different ips. Per torrent 3 simultaneous connections are permitted per user, and in case of leeching only 1 (That means you can leech a torrent from one location only at a time.
Why do i get a "Unknown Passkey" error?
You will get this error, firstly if you are not registered on our tracker, or if you havent downloaded the torrent to use from our webpage, when you were logged in. In this case, just register or log in and redownload the torrent. There is a chance to get this error also, at the first time you download anything as a new user, or at the first download after you reset your passkey. The reason is simply that the tracker reviews the changes in the passkeys every few minutes and not instantly. For that reason just leave the torrent running for a few minutes, and you will get eventually an OK message from the tracker.
When do i need to reset my passkey?
What is DHT and Why must i turn it off?
DHT must be disabled in your client, DHT can cause your stats to be recorded incorrectly and could be seen as cheating also disable PEX (peer exchange) Anyone using this will be banned for cheating the system. Check your snatchlist regularly to ensure stats are being recorded correctly, allow 30mins for the tracker to update your stats.
How can I improve my download speed? - Наверх
Do not immediately jump on new torrents
The download speed mostly depends on the seeder-to-leecher ratio (SLR). Poor download speed is mainly a problem with new and very popular torrents where the SLR is low.
(Proselytising sidenote: make sure you remember that you did not enjoy the low speed. Seed so that others will not endure the same.)
There are a couple of things that you can try on your end to improve your speed:
In particular, do not do it if you have a slow connection. The best speeds will be found around the half-life of a torrent, when the SLR will be at its highest. (The downside is that you will not be able to seed so much. It's up to you to balance the pros and cons of this.)
Limit your upload speed
The upload speed affects the download speed in essentially two ways:
If you are running more than one instance of a client it is the overall upload speed that you must take into account. Some clients (e.g. Azureus) limit global upload speed, others (e.g. Shad0w's) do it on a per torrent basis. Know your client. The same applies if you are using your connection for anything else (e.g. browsing or ftp), always think of the overall upload speed.
Limit the number of simultaneous connections
Some operating systems (like Windows 9x) do not deal well with a large number of connections, and may even crash. Also some home routers (particularly when running NAT and/or firewall with stateful inspection services) tend to become slow or crash when having to deal with too many connections. There are no fixed values for this, you may try 60 or 100 and experiment with the value. Note that these numbers are additive, if you have two instances of a client running the numbers add up.
Limit the number of simultaneous uploads
Isn't this the same as above? No. Connections limit the number of peers your client is talking to and/or downloading from. Uploads limit the number of peers your client is actually uploading to. The ideal number is typically much lower than the number of connections, and highly dependent on your (physical) connection.
Just give it some time
As explained above peers favour other peers that upload to them. When you start leeching a new torrent you have nothing to offer to other peers and they will tend to ignore you. This makes the starts slow, in particular if, by change, the peers you are connected to include few or no seeders. The download speed should increase as soon as you have some pieces to share.
Why is my browsing so slow while leeching?
Your download speed is always finite. If you are a peer in a fast torrent it will almost certainly saturate your download bandwidth, and your browsing will suffer. At the moment there is no client that allows you to limit the download speed, only the upload. You will have to use a third-party solution, such as NetLimiter.
Browsing was used just as an example, the same would apply to gaming, IMing, etc...
My ISP uses a transparent proxy. What should I do? - Наверх
What is a proxy?
Basically a middleman. When you are browsing a site through a proxy your requests are sent to the proxy and the proxy forwards them to the site instead of you connecting directly to the site. There are several classifications (the terminology is far from standard):
A transparent proxy may or may not be anonymous, and there are several levels of anonymity.
How do I find out if I'm behind a (transparent/anonymous) proxy?
Try ProxyJudge. It lists the HTTP headers that the server where it is running received from you. The relevant ones are HTTP_CLIENT_IP, HTTP_X_FORWARDED_FOR and REMOTE_ADDR.
Why is my port listed as "---" even though I'm not NAT/Firewalled?
The TBDev Yuna Scatari Edition tracker is quite smart at finding your real IP, but it does need the proxy to send the HTTP header HTTP_X_FORWARDED_FOR. If your ISP's proxy does not then what happens is that the tracker will interpret the proxy's IP address as the client's IP address. So when you login and the tracker tries to connect to your client to see if you are NAT/firewalled it will actually try to connect to the proxy on the port your client reports to be using for incoming connections. Naturally the proxy will not be listening on that port, the connection will fail and the tracker will think you are NAT/firewalled.
Can I bypass my ISP's proxy?
If your ISP only allows HTTP traffic through port 80 or blocks the usual proxy ports then you would need to use something like socks and that is outside the scope of this FAQ.
The site accepts connections on port 81 besides the usual 80, and using them may be enough to fool some proxies. So the first thing to try should be connecting to www.templateshares.net:81. Note that even if this works your bt client will still try to connect to port 80 unless you edit the announce url in the .torrent file.
Otherwise you may try the following:
Notice that now you will be doing all your browsing through a public proxy, which are typically quite slow. Communications between peers do not use port 80 so their speed will not be affected by this, and should be better than when you were "unconnectable".
How do I make my bittorrent client use a proxy?
Just configure Windows XP as above. When you configure a proxy for Internet Explorer you're actually configuring a proxy for all HTTP traffic (thank Microsoft and their "IE as part of the OS policy" ). On the other hand if you use another browser (Opera/Mozilla/Firefox) and configure a proxy there you'll be configuring a proxy just for that browser. We don't know of any BT client that allows a proxy to be specified explicitly.
Why can't I signup from behind a proxy?
It is our policy not to allow new accounts to be opened from behind a proxy.
Does this apply to other torrent sites?
This section was written for Template Shares, a closed, port 80-81 tracker. Other trackers may be open or closed, and many listen on e.g. ports 6868 or 6969. The above does not necessarily apply to other trackers.
Why can't I connect? Is the site blocking me? - Наверх
Maybe my address is blacklisted?
The site blocks addresses listed in the (former) PeerGuardian database, as well as addresses of banned users. This works at Apache/PHP level, it's just a script that blocks logins from those addresses. It should not stop you from reaching the site. In particular it does not block lower level protocols, you should be able to ping/traceroute the server even if your address is blacklisted. If you cannot then the reason for the problem lies elsewhere.
If somehow your address is indeed blocked in the PG database do not contact us about it, it is not our policy to open ad hoc exceptions. You should clear your IP with the database maintainers instead.
Your ISP blocks the site's address
(In first place, it's unlikely your ISP is doing so. DNS name resolution and/or network problems are the usual culprits.)
There's nothing we can do. You should contact your ISP (or get a new one). Note that you can still visit the site via a proxy, follow the instructions in the relevant section. In this case it doesn't matter if the proxy is anonymous or not, or which port it listens to.
Notice that you will always be listed as an "unconnectable" client because the tracker will be unable to check that you're capable of accepting incoming connections.
Alternate port (81)
Some of our torrents use ports other than the usual HTTP port 80. This may cause problems for some users, for instance those behind some firewall or proxy configurations. You can easily solve this by editing the .torrent file yourself with any torrent editor, e.g. MakeTorrent, and replacing the announce url bit-torrent.kiev.ua:81 with bit-torrent.kiev.ua:80 or just templateshares.net.
Editing the .torrent with Notepad is not recommended. It may look like a text file, but it is in fact a bencoded file. If for some reason you must use a plain text editor, change the announce url to bit-torrent.kiev.ua:80, not bit-torrent.kiev.ua. (If you're thinking about changing the number before the announce url instead, you know too much to be reading this.)
What if I can't find the answer to my problem here? - Наверх
You can try these:
Post in the Forums, by all means. You'll find they are usually a friendly and helpful place, provided you follow a few basic guidelines: